SINTESIS KATALIS KOH/CaO MENGGUNAKAN METODE SOL-GEL UNTUK TRANSESTERIFIKASI CPO MENJADI BIODIESEL : VARIASI KECEPATAN PENGADUKAN

Simple item page
dc.contributor.authorMaharani, Utari
dc.contributor.supervisorNurhayati, Nurhayati
dc.date.accessioned2022-06-15T07:52:45Z
dc.date.available2022-06-15T07:52:45Z
dc.date.issued2021-12
dc.description.abstractIn this study, biodiesel was synthesized using crude palm oil (CPO) with a KOH/CaO catalyst from blood clam shells that had been calcined at 900 °C for 5 hours. KOH/CaO catalyst was synthesized using the sol-gel method by adding KOH and ethylene glycol and it was calcined again at 700 °C for 5 hours. The catalyst analysis used in this study was XRD to determine the type of minerals contained in the catalyst. Based on the XRD analysis of the KOH/CaO catalyst, it showed that there were portlandite and calcite peaks and lime (CaO) peaks were found on the KOH/CaO catalyst of 1 g KOH at 700 °C. The crystal size of the KOH/CaO catalyst added 0.5 ; 1 and 2 g of KOH were 219.9924, respectively; 179.9484 and 195.9774 nm. KOH/CaO catalyst was tested in biodiesel synthesis using various stirring speeds (300, 400, 500, and 600 rpm), at a reaction temperature of 60°C, a reaction time of 3 hours, a mole ratio of oil: methanol 1:15 and a catalyst weight of 1%. The most effective catalyst to produce biodiesel was KOH/CaO 1g KOH with a biodiesel yield of 94.91 %. Optimum biodiesel was obtained at KOH/CaO 1g KOH catalyst at 700 °C with a heavy reaction condition of 1 wt% catalyst, the reaction time of 3 hours, stirring speed of 500 rpm, the temperature of 60 °C and the mole ratio of oil to methanol 1: 15 resulted in a yield of 94, 91%. Increasing the stirring speed increases the frequency of collisions with the reactants thereby increasing the yield of biodiesel. The characteristics of the biodiesel produced are 0.01% water content, specific gravity 880 kg/m3, viscosity 5.38 mm2/s, carbon residue 0.01% by weight, acid number 0.42 mg-KOH/g, saponification number 225.95, the iodine number is 50.44 and the cetane number is 59.11. In general, the characteristics of biodiesel are following the requirements of SNI 7182.2015.en_US
dc.description.sponsorshipJurusan Kimia Fakultas Matematika dan Ilmu Pengetahuan Alamen_US
dc.identifier.citationPerpustakaanen_US
dc.identifier.issnElfitra
dc.identifier.urihttps://repository.unri.ac.id/handle/123456789/10538
dc.language.isoenen_US
dc.publisherElfitraen_US
dc.subjectbiodieselen_US
dc.subjectKOH/CaO catalysten_US
dc.subjecttransesterificationen_US
dc.titleSINTESIS KATALIS KOH/CaO MENGGUNAKAN METODE SOL-GEL UNTUK TRANSESTERIFIKASI CPO MENJADI BIODIESEL : VARIASI KECEPATAN PENGADUKANen_US
dc.typeArticleen_US

Files

Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
UTARI MAHARANI_compressed.pdf
Size:
175.75 KB
Format:
Unknown data format
Description:
artikel
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Chemical