IDENTIFIKASI FASE MAGNETIK DAN KOMPOSISI ELEMEN PARTIKEL PASIR SUNGAI ROKAN SEBAGI FUNGSI WAKTU BALL MILLING
No Thumbnail Available
Date
2021-03
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Identification of magnetic particles and the elemental composition of the natural sands of the Rokan
River, Riau Province has been done. The natural sand samples that have been dried under the sun were
separated between magnetic and non-magnetic particles using Iron Sand Separator (ISS). This result was called
the product of ISS. The product of the ISS was milled using ball milling with iron balls having diameter of 1.5
cm for 30 hours and 100 hours. The results of this process were separated using Neodynium Iron Boron
(NdFeB) magnets and this result is called ball milling product. The magnetic susceptibility was calculated
based on the values of magnetic induction (Bo) of a solenoid of 2500 turns, 10 cm long and 3 cm in dimater and
total magnetic induction of the solenoid (BT). The magnetic induction the solenoid was measured using Pasco
Magnetic Probe PS….. ?? . The results show that the magnetic susceptibility increases from 1140.59 × 10-5 to
15495.71 × 10-5 for natural sand and ball milling product for 100 hours, respectively. The X-Ray Fluorescence
(XRF) test shows that the composition of the magnetic element Fe increases from 1.67% to 35.39% for natural
sand and bal milling product of 100 hour, respectively. . The X-Ray Diffraction (XRD) test shows that the
magnetic phase of 100 hours ball milling product has a hematite phase (α-Fe2O3) with some impurities such as
silicon (Si) and Titanium (Ti)
Description
Keywords
Natural sand, Ball milling, magnetic induction, magnetic susceptibility, and X –Ray Diffraction