Browsing by Author "Basri, Nur Hamizah"

Now showing 1 - 11 of 11
  • No Thumbnail Available
    Item
    Effect of carbonization temperature on the physical and electrochemical properties of supercapacitor electrode from fibers of oil palm empty fruit bunches
    (2015-09-07) Ishak; Deraman, Mohamad; Talib; Basri, Nur Hamizah; Awitdrus; Farma, Rakhmawati; Taer, Erman; Omar, Ramli; Dollah, Besek Nurdiana Mohd
    Self-adhesive carbon grains (SACG) was prepared from fibers of oil palm empty fruit bunches. The SACG green monoliths were carbonized in N2 environment at 400, 500, 600 and 700°C to produce carbon monoliths labeled as CM1, CM2, CM3 and CM4 respectively. The CMs were activated in CO2 surrounding at 800°C for 1 hour to produce activated carbon monolith electrodes (ACM1, ACM2, ACM3 and ACM4). The physical properties of the CMs and ACMs were investigated using X-ray diffraction, field emission scanning electron microscopy (FESEM) and N2 adsorption-desorption isotherm techniques. ACMs were used as electrode to fabricate symmetry supercapacitor cells and the cells’ performances were investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) standard techniques. In this paper we report the physical and electrochemical properties of the ACM electrodes by analyzing the influence of the carbonization temperature on these properties
  • No Thumbnail Available
    Item
    Effect of electrolyte concentration on performance of supercapacitor carbon electrode from fibers of oil palm empty fruit bunches
    (2015-09-07) Farma, Rakhmawati; Deraman, Mohamad; Talib; Awitdrus; Omar, Ramli; Ishak; Taer, Erman; Basri, Nur Hamizah; Dollah, Besek Nurdiana Mohd
    Fibers of oil palm empty fruit bunches were used to produce self-adhesive carbon grains (SACG). The SACG green monoliths were carbonized in N2 environment at 800°C to produce carbon monoliths (CM) and the CM was CO2 activated at 800°C for 4 hour to produce activated carbon monolith electrodes (ACM). The physical properties of the CMs and ACMs were investigated using X-ray diffraction, field emission scanning electron microscopy and nitrogen adsorption-desorption. ACMs were used as electrode to fabricate symmetry supercapacitor cells and the cells which used H2SO4 electrolyte at 0.5, 1.0 and 1.5 M were investigated using electrochemical impedance spectroscopy, cyclic voltammetry and galvanostatic charge-discharge standard techniques. In this paper we report the physical properties of the ACM electrodes and the effect of electrolyte concentration on the electrochemical properties the ACM electrodes
  • No Thumbnail Available
    Item
    Effects of Activation Time on the Performance of Supercapacitor Binderless Activated Carbon Electrodes Derived from Fibers of Oil Palm Empty Fruit Bunches
    (2015-09-07) Ishak; Deraman, Mohamad; Dollah, Besek Nurdiana Mohd; Othman; Omar, Ramli; Basri, Nur Hamizah; Nor, Najah Syahirah Mohd; Taer, Erman; Awitdrus; Farma, Rakhmawati; Aziz
    Green monoliths (GMs) with different composition, labelled as GM1, GM2 and GM3, were prepared from self-adhesive carbon grains (SACG) produced from fibers of oil palm empty fruit bunches, SACG treated with 0.4 M H2SO4 and mixtures of SACG and carbon nanotubes (5 wt.%) treated with 0.4 M H2SO4, respectively. Each GMs was carbonized and then activated with holding time of 1 h and 2 h, respectively, to produce their respective activated carbon monoliths (ACMs). These ACMs were used as electrodes to fabricate supercapacitor cells using H2SO4 electrolytes, Teflon separator and stainless steel 316L current collector. The porosity of the ACMs, examined by nitrogen adsorption-desorption isotherm method were found affected after prolonging the activation time. From the electrochemical characterization of the ACMs electrodes using galvanic charge-discharge methods, it was found that supercapacitor cells fabricated using the ACMs produced by longer activation time (2 h) showed better performance, which had higher specific capacitance (113 F/g), specific power (159 W/kg) and specific energy (3.35 W h/kg), compared to the cells using ACMs produced by shorter activation time (1 h).
  • No Thumbnail Available
    Item
    Impedance spectroscopic analysis of composite electrode from activated carbon/conductive materials/ruthenium oxide for supercapacitor applications
    (2015-09-07) Taer, Erman; Deraman, Mohamad; Talib; Awitdrus; Farma, Rakhmawati; Ishak; Omar, Ramli; Dollah, Besek Nurdiana Mohd; Basri, Nur Hamizah; Othman; Kanwal
    Activated carbon powders (ACP) were produced from the KOH treated pre-carbonized rubber wood sawdust. Different conductive materials (graphite, carbon black and carbon nanotubes (CNTs)) were added with a binder (polivinylidene fluoride (PVDF)) into ACP to improve the supercapacitive performance of the activated carbon (AC) electrodes. Symmetric supercapacitor cells, fabricated using these AC electrodes and 1 molar H2SO4 electrolyte, were analyzed using a standard electrochemical impedance spectroscopy technique. The addition of graphite, carbon black and CNTs was found effective in reducing the cell resistance from 165 to 68, 23 and 49 Ohm respectively, and increasing the specific capacitance of the AC electrodes from 3 to 7, 17, 32 F g-1 respectively. Since the addition of CNTs can produce the highest specific capacitance, CNTs were chosen as a conductive material to produce AC composite electrodes that were added with 2.5 %, 5 % and 10 % (by weight) electro-active material namely ruthenium oxide; PVDF binder and CNTs contents were kept at 5 % by weight in each AC composite produced. The highest specific capacitance of the cells obtained in this study was 86 F g-1, i.e. for the cell with the resistance of 15 Ohm and composite electrode consists of 5 % ruthenium oxide.
  • No Thumbnail Available
    Item
    Influence of gamma irradiation exposure on the performance of supercapacitor electrodes made from oil palm empty fruit bunches
    (2015-08-18) Nor, Najah Syahirah Mohd; Deraman, Mohamad; Omar, Ramli; Awitdrus; Farma, Rakhmawati; Basri, Nur Hamizah; Dolah, Besek Nurdiana Mohd; Mamat, Nurul Fatin; Yatim, Baharudin; Daud, Mohd Norizam Md
    Carbon-monolith electrodes for supercapacitors were prepared from GMs (green monoliths) made from pre-carbonized fibers of oil palm EFB (empty fruit bunches) and GMs of pre-carbonized EFB fibers exposed to gamma radiation at 5 kGy, 15 kGy, and 20 kGy. GMs and irradiated GMs were carbonized and activated to prepare ACM (activated-carbon-monolith) electrodes. The gamma radiation affected the pore structure of the ACM electrodes and the electrochemical performance of the supercapacitors; irradiation doses of 0 kGy, 5 kGy, 15 kGy and 20 kGy produced specific capacitances of 121 F g 1, 196 F g 1, 11 F g 1, and 12 F g 1, respectively. The irradiation dose of 5 kGy appears to be optimum and produces a specific power and specific energy of 236 W kg 1 and 5.45 W h kg 1, respectively, representing 34% and 60% increases over ACM electrodes prepared from non-irradiated GMs.
  • No Thumbnail Available
    Item
    Nanoporous separators for supercapacitor using activated carbon monolith electrode from oil palm empty fruit bunches
    (2015-09-06) Nor, Najah Syahirah Mohd; Deraman, Mohamad; Omar, Ramli; Taer, Erman; Awitdrus; Farma, Rakhmawati; Basri, Nur Hamizah
    Activated porous carbon electrode prepared from fibres of oil palm empty fruit bunches was used for preparing the carbon based supercapacitor cells. The symmetrical supercapacitor cells were fabricated using carbon electrodes, stainless steel current collector, H2SO4 electrolyte, and three types of nanoporous separators. Cells A, B and C were fabricated using polypropylene, eggshell membrane, and filter paper, respectively. Electrochemical characterizations data from Electrochemical Impedance Spectroscopy, Cyclic Voltammetry, and Galvanic Charge Discharge techniques showed that specific capacitance, specific power and specific energy for cell A were 122 F g-1, 177 W kg-1, 3.42 Wh kg-1, cell B; 125 F g- 1, 179 W kg-1, and 3.64 Wh kg-1, and cell C; 180 F g-1, 178 W kg-1, 4.27 Wh kg-1. All the micrographs from Field Emission Scanning Electron Microscope showed that the different in nanoporous structure of the separators lead to a significant different in influencing the values of specific capacitance, power and energy of supercapacitors, which is associated with the mobility of ion into the pore network. These results indicated that the filter paper was superior than the eggshell membrane and polypropylene nanoporous separators. However, we found that in terms of acidic resistance, polypropylene was the best nanoporous separator for acidic medium.
  • No Thumbnail Available
    Item
    A New Empirical Equation for Estimating Specific Surface Area of Supercapacitor Carbon Electrode from X-ray Diffraction
    (2015-08-18) Deraman, Mohamad; Daik, Rusli; Soltaninejad, Sepideh; Nor, Najah Syahirah Mohd; Awitdrus; Farma, Rakhmawati; Mamat, Nurul Fatin; Basri, Nur Hamizah; Othman, Mohd Amir Radhi
    The current trend of increasing research interest in supercapacitor is due to high demands for an energy storage device that can work in systems that require either low or high power-energy usage. In a supercapacitor using porous carbon electrodes, the energy storage mechanism involves the electrolyte ions in electrode pores and electronic charges in electrodes to form electric double layers at the electrode-electrolyte interface without undergoes any chemical reaction. The specific surface area of porous electrodes, which affect the performance of supercapacitor, have been widely investigated by many researchers using the nitrogen adsorption-desorption measurement. However, despite its simplicity, the X-ray diffraction method is rarely found being used to determine the specific surface area of porous electrodes. Therefore, in the present paper, we propose a new equation which expressed the specific surface area of electrodes as a function the electrode structural parameters obtained from the X-ray diffraction data, and duration of activation time employed during the electrode preparation. This equation is found to produce a satisfactory result and is expected to be beneficial for studying supercapacitor electrode materials
  • No Thumbnail Available
    Item
    Physical and electrochemical properties of supercapacitor composite electrodes prepared from biomass carbon and carbon from green petroleum coke
    (2015-09-09) Awitdrus; Deraman, Mohamad; Talib; Farma, Rakhmawati; Omar, Ramli; Ishak; Taer, Erman; Dollah, Besek Nurdiana Mohd; Basri, Nur Hamizah; Nor, Najah Syahirah Mohd
    The green monoliths (GMs) were prepared from the mixtures of pre-carbonized fibers of oil palm empty fruit bunches (or self-adhesive carbon grains (SACG)) and green petroleum coke (GPC) with the mixing ratio of 0, 10, 30, 50 and 70 % GPC, respectively. The GMs were carbonized in N2 environment at 800oC to produce carbon monoliths (CM00, CM10, CM30, CM50 and CM70). The CMs were CO2 activated at 800oC for 1 hour to produced activated carbon monolith electrodes (ACM00, ACM10, ACM30, ACM50 and ACM70). For each percentage of GPC, three duplicate symmetrical supercapacitor cells were fabricated using these activated carbon monolith electrodes respectively, and the capacitive performance amongst the cells was compared and analyzed in order to observe the relationship between the capacitive performance and the physical properties (microstructure and porosity) of the ACMs electrodes containing varying percentage of GPC.
  • No Thumbnail Available
    Item
    Preparation of highly porous binderless activated carbon electrodes from fibres of oil palm empty fruit bunches for application in supercapacitors
    (2015-09-07) Farma, Rakhmawati; Deraman, Mohamad; Awitdrus; Taer, Erman; Talib; Basri, Nur Hamizah; Manjunatha; Ishak; Dollah, Besek Nurdiana Mohd; Hashmi
    Fibres from oil palm empty fruit bunches, generated in large quantities by palm oil mills, were processed into self-adhesive carbon grains (SACG). Untreated and KOH-treated SACG were converted without binder into green monolith prior to N2-carbonisation and CO2-activation to produce highly porous binderless carbon monolith electrodes for supercapacitor applications. Characterisation of the pore structure of the electrodes revealed a significant advantage from combining the chemical and physical activation processes. The electrochemical measurements of the supercapacitor cells fabricated using these electrodes, using cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge–discharge techniques consistently found that approximately 3 h of activation time, achieved via a multi-step heating profile, produced electrodes with a high surface area of 1704 m2 g 1 and a total pore volume of 0.889 cm3 g 1, corresponding to high values for the specific capacitance, specific energy and specific power of 150 F g 1, 4.297 Wh kg 1 and 173Wkg 1, respectively
  • No Thumbnail Available
    Item
    Supercapacitor Electrodes from Activated Carbon Monoliths and Carbon Nanotubes
    (2015-09-07) Dollah, Besek Nurdiana Mohd; Othman; Deraman, Mohamad; Basri, Nur Hamizah; Farma, Rakhmawati; Talib; Ishak
    Binderless monoliths of supercapacitor electrodes were prepared by the carbonization (N2) and activation (CO2) of green monoliths (GMs). GMs were made from mixtures of self-adhesive carbon grains (SACG) of fibers from oil palm empty fruit bunches and a combination of 5 & 6% KOH and 0, 5 & 6% carbon nanotubes (CNTs) by weight. The electrodes from GMs containing CNTs were found to have lower specific BET surface area (SBET). The electrochemical behavior of the supercapacitor fabricated using the prepared electrodes were investigated by electrochemical impedance spectroscopy (EIS) and galvanostatic charge-discharge (GCD). In general an addition of CNTs into the GMs reduces the equivalent series resistance (ESR) value of the cells. A cell fabricated using electrodes from GM with 5% CNT and 5% KOH was found to have the largest reduction of ESR value than that from the others GMs containing CNT. The cell has steeper Warburg’s slope than that from its respective non-CNT GM, which reflect the smaller resistance for electrolyte ions to move into pores of electrodes despite these electrodes having largest reduction in specific BET surface area. The cell also has the smallest reduction of specific capacitance (Csp) and maintains the specific power range despite a reduction in the specific energy range due to the CNT addition.
  • No Thumbnail Available
    Item
    Supercapacitors using binderless composite monolith electrodes from carbon nanotubes and pre-carbonized biomass residues
    (2015-09-10) Basri, Nur Hamizah; Deraman, Mohamad; Kanwal; Talib; Manjunatha; Aziz; Farma, Rakhmawati
    Binderless composite monolith (BCM) electrodes prepared from carbon nanotubes (CNTs) and self-adhesive carbon grains (SACGs) were used in a symmetrical supercapacitor. The SACGs were prepared from fibers of oil palm empty fruit bunches (EFBs) from oil palm tree (Elaeis guineensis), Heliotropium dasycarpum (H. dasycarpum) and Guaiacum officinale (G. officinale). For each biomass, the BCMs were prepared by the carbonization and activation of green monoliths (GMs) containing SACGs treated with KOH and a mixture of SACGs and CNTs treated with KOH. Thermal decomposition behavior of all SACGs was found to be slightly different because of the difference in their compositions. In addition, BCMs from H. dasycarpum and G. officinale were found to have SiO2. The BET surface areas were 1656, 1031 and 532 m2 g 1 for the BCMs from EFB, H. dasycarpum and G. officinale, respectively, and these values decreased by 40, 50 and 31% upon CNTs addition. Consequently, the specific capacitance decreased from w124 to w104 and w49 F g 1 to w111, w87 and w31 F g 1, respectively. However, addition of CNTs reduced the equivalent series resistance (ESR) by a factor of 83.9 (EFB), 90.6 (H. dasycarpum) and 38.8 (G. officinale) %. It was also found that CNTs addition contributed to improving the decay of Csp with increasing scan rate if the electrode surface area was sufficiently high.