Abstract:
The flow configuration and distribution behavior of two-phase flow in a
distributor made of acrylic resin have been investigated experimentally. In this
study, air and water were used as two-phase flow working fluids. The
distributor consists of one inlet and two outlets, which are set as upper and
lower, respectively. The flow visualization at the distributor was made by using
a high–speed camera. The flow rates of air and water flowing out from the
upper and lower outlet branches were measured. Effects of inclination angle of
the distributor were investigated. By changing the inclination angle from
vertical to horizontal, uneven distributions were also observed. The distribution
of two-phase flow through distributor tends even flow distribution on the
vertical position and tends uneven distribution on inclined and horizontal
positions. It is shown that even distribution could be achieved at high
superficial velocities of both air and water
